AVS Forum Addicted Member
Join Date: Oct 2003
Mentioned: 766 Post(s)
Tagged: 1 Thread(s)
Quoted: 2866 Post(s)
q: Is the Inuke6000 also good for 4 SI18D4 , 2 per channel @ 4ohm load ?
a: yes. and there are a couple of different ways to wire them. suggested wiring is each driver in SERIES for 8 ohms, then 2 drivers in parallel for 4 ohms net per channel.
that will pull a mighty 4400 watts or so from the amp (well, at least in some theory), 1100 watts per driver.
inuke 6000dsp/4X si18d4/4X marty sub enclosures...may be the reigning bang for the buck output champion setup.
what may be confusing here is that the nomenclature of D4 means DUAL 4 ohm voice coils, so the driver can be wired in parallel for 2 ohms or in series for 8 ohms.
Last edited by LTD02; 08-19-2014 at 05:44 PM.